Moisture Control
DiamaPro System's Moisture Control Plus penetrates below the surface to become an integral part of the concrete, filling micro-voids and bonding into a dense mass creating a long-term internal seal. The proprietary complex wetting agents dramatically reduce the liquid’s surface tension which enables deep and efficient penetration even in dense concrete substrates.
It is used to manage moisture vapor transmission under most non-breathable coatings and flooring systems. It minimizes the effect of osmotic pressure; moving or flowing water must be stopped before application.
It can also replace a liquid densifier/hardener at the surface of cementitious substrates when polishing concrete or cement-based overlays. DiamaPro Moisture Control can also be used to stabilize dyes due to moisture vapor movement in dyed/polished concrete.
Uniquely formulated with Microban antimicrobial technology, Moisture Control helps reduce the growth of fungal and bacterial microbes at the near surface of the substrate.
It can be applied as early as 4 hours after fresh concrete placement. When applied early, it will reduce rapid evaporation of the mixed water during the hydration process.
